Your shopping cart is empty!
DRIVEN BY CARE
-
My Account Sign In / Register
×
Select Your Vehicle to Shop for the Correct Parts:
Show More Filters
Show results for
Refine By
Availability
On Sale
Condition
Price
Under $10 (31)$10 to $25 (51)$25 to $50 (64)$50 to $100 (40)$100 to $250 (39)$250 to $500 (33)$500 & Above (137)
$ to $ go
Manufacturer
Show Less Filters
Model: 3122944
Condition: NEW
Keeps your battery fully charged and maintained to extend battery life. Monitoring circuitry automatically turns charger on & off as needed. Fully protected against overcharging, short circuits, and reverse polarity. Features red/green…
Model: 3022526
Condition: NEW
Upper Radiator Hose Clamp
Tower clamps like this were used on Chevelle from the factory and being cold galvanized they were very susceptible to rust and corrosion.
Tip: Use a crescent type wrench at the square nut to hold it so…
Model: 3022527
Condition: NEW
Lower Radiator Hose Clamp
Tower clamps like this were used on Chevelle from the factory and being cold galvanized they were very susceptible to rust and corrosion.
…
Model: 3023632
Condition: NEW
Reproduction of Original Long, Cut to Length Hose Molded 90? End (2) Correct Black Pinch Style Clamps Nice reproduction of the original Chevelle Positive Crankcase Ventilation (PCV) hose. On most Chevelle applications the PCV hose runs…
Model: 3428042
Condition: NEW
Constructed from high-quality materials for long-lasting durability
Easy to install
Deluxe style includes essential pieces for installation, plus clamps and a form-fitting, plastic-coated wire basket
Our Engine Coolant…
Model: 2033809
Condition: NEW
Steel Braided Hose Kit is the most inexpensive, but eye-catching way to decorate your engine bay for a show cars high quality appearance or to replace the old dirty look of rubber hoses and lines. Simply disconnect one end of each…
Model: 3022631
Condition: NEW
Reproduction Of Original 2 Correct Clamps Included Ribbed Hose With GM Markings This Chevelle reproduction bypass hose has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find…
Model: 3026096
Condition: NEW
Correct diameter fuel hoses for front and rear connections. With four correct green fuel hose pinch clamps.
…
Model: 3026098
Condition: NEW
Correct diameter hose with two green pinch clamps included.
…
Model: 3038443
Condition: NEW
4-Piece Set Correct Reproduction Galvanized Finish Slotted Hex Head Screw Fits 1-1/16 Heater Hose Two Required Per Car Correct Wittek Markings The El Camino Store offers this non-dated coded tower style hose clamp for the restorer who…
Model: 4962080
Condition: NEW
Steel Braided Hose Kit is the most inexpensive, but eye-catching way to decorate your engine bay for a show cars high quality appearance or to replace the old dirty look of rubber hoses and lines. Simply disconnect one end of each…
Model: 4897661
Condition: NEW
Manufactured from high quality aluminum to last the life of your vehicle.Metal screen and magnet to capture contaminates and metallic particles.Equipped with spring bypass that will engage if the filter becomes plugged.The filter can be…
Model: 3040008
Condition: NEW
Restoration Correct 8TH Digit Identifies The Engine And Transmission Combination Of Your Car Corrosion And Rust Inhibitor Coated Heavy Cast OE Style Construction Includes Quality Gasket To Ensure Proper Seal Quality Machined Thread Parts…
Model: 3038442
Condition: NEW
These are the fasteners needed to assemble heater related components.…
Model: 3224690
Condition: NEW
Reproduction Of Original
Factory Correct Clamps
Correct GM Markings
Connects Filler Neck Tube To Tank
Quality reproduction of a common wear part. This hose connects the filler neck to the gas tank on a…
Model: 5019121
This 1969-1972 Chevelle / El Camino Super Sport & 1970-1972 Monte Carlo 2.5" Dual Exhaust Chrome Tip provides an authentic finishing touch, enhancing the appearance and performance of your classic GM vehicle’s exhaust system…
Model: 3026099
Condition: NEW
For use with 1969 350/255-300 and 396/325-350 with Quadrajet and vapor return lines. Includes three correct diameter hoses and four each red vapor line and green fuel line clamps.
…
Model: 3021879
Condition: NEW
Includes hose, correct check valve, grommet and pinch clamps.
…
Model: 3155700
Condition: NEW
Direct Fit For The 1968-1977 Chevrolet El Camino / Chevelle With A 307 5.0L, 327 5.4L, 350 5.7L, or 400 6.6L
Constructed From Five Layers Of Silicone With Heat-Resistant Embedded Fibers
Improves Heat And Pressure…
Model: 3038502
Condition: NEW
These are the correct fasteners needed to assemble air conditioning related components. This kit includes five black flat wound spring clips.
…
Model: 3026097
Condition: NEW
Reproduction of Original
3 inches in length and 2 inches in diameter.
Correct Length
Correct GM Stamping
(2) Correct Tower Style Hose Clamps
Quality reproduction of a common wear part.
This hose connects the filler neck…
Model: 4012620
Condition: NEW
These Mr. Gasket brackets help prevent oil leaks from stamped valve covers. They allow you to tighten down valve covers and prevent bending the flange by distributing clamp load.
Features:
Chrome Plated Steel
Custom Short…
Model: 4006012
Condition: NEW
Flowtech Exhaust products are the perfect combination of quality and value. We are proud to offer these 1-3/4" and 1-7/8" Universal Turbo Headers for Small Block Ford engines. These down and forward headers are available in ceramic coated…
Model: 5006383
Condition: NEW
This 1969-1972 Chevelle / El Camino Super Sport & 1970-1972 Monte Carlo 2.5" Dual Exhaust Chrome Tip provides an authentic finishing touch, enhancing the appearance and performance of your classic GM vehicle’s exhaust system…
Model: 3046544
Condition: NEW
Reproduction Of Original Includes Two Clamps Fits Left Or Right
…
Model: 3041421
Condition: NEW
Includes correct white strip hose, black hose tie, plastic T and hose clamps.
…
Model: 3038741
Condition: NEW
Correct Reproduction Of Original GM Square Style Stamping Correct Style Clamps Fits Standard Or Deluxe Heater This El Camino reproduction heater hose kit has been manufactured to original factory specifications using today's modern…
Model: 3038513
Condition: NEW
These are the correct fasteners needed to assemble air conditioning related components. This six-piece kit includes hex bolts, nuts and washers. This kit is used to mount the two heater hose clamps to the front of the front AC compressor…
Model: 3038461
Condition: NEW
6 Pieces Set These are the correct fasteners needed to assemble air conditioning related components. This six-piece kit includes hex bolts, nuts and split washers. This kit is used to mount the two heater hose clamps to the front of the…
Model: 3029750
Condition: NEW
Reproduction Of Original Includes Two Clamps Fits Left Or Right
…
Model: 5020277
Condition: NEW
The 1960-1980 GM / Chrysler Power Steering Return Hose with 3/8" I.D. is a high-quality replacement hose designed to handle the low-pressure return flow from the power steering system back to the reservoir. Built from durable, oil- and…
Model: 4989322
Condition: NEW
Chrome Slot Fillister Screws…
Model: 4011281
Condition: NEW
Insulating with Adel 75005 compound means easier mounting of wire, fuel hoses, etcetera,, to any solid surface. Aircraft quality materials are used. 9/16 inch i.d. (inner diameter). Six per set.
…
Model: 4011278
Condition: NEW
Insulating with Adel 75005 compound means easier mounting of wire, fuel hoses, etcetera, to any solid surface. Aircraft quality materials are used. 3/16 inch i.d. (inner diameter). Six per set.
…
Model: 3919414
Condition: NEW
Fuel Filter, Inline Mount, Black, 10 Microns, -10 AN Female Inlet, Outlet, Gasoline, Each
Brand:Aeromotive
Part Type:Fuel Filters
Product Line:Aeromotive Fuel Filters
Fuel Filter Style:Inline
Inlet Quantity:One
Inlet…