This coupler (rag joint) is required to connect the steering column to the steering box.
Coupler Specs:
Shaft Size: 3/4" coarse spline with flat at bolt head side
Spline Count: 25
Total OD: 3-1/4"
Bolt Size: 5/16"
Bolt…
Reproduction Of Original (3) Hardened Hex Head Bolts (3) Hardened Beveled Washers Attaches Steering Box To Subframe Works With Delphi Fast Ratio Steering Boxes This steering box bolt set attaches the steering box to the front subframe of…
Ensure a secure and stable steering system with this mounting bolt and washer set, designed for 1970-1981 Chevrolet Camaro models. This factory-correct set provides the necessary hardware to attach the steering box to the frame, ensuring…
This is the stud and bolt kit for Saginaw power steering pumps. Includes (2) studs (3/8"-16 thread), (1) bolt 3/8"-16 thread). Fits most Saginaw pumps through 1977 including Saginaw P series. This set is unplated for use with painted…
OER® Authorized reproduction of the original steering coupling joint for various models. This coupler (rag joint) is required to connect the steering column to the steering box.
Coupler specifications:
Shaft size: 3/4" fine…
Ensure a secure seal for your power steering system with this power steering pump cap, designed for 1962-1999 vehicles equipped with Saginaw pumps. This factory-correct cap prevents fluid leaks and contamination, maintaining the optimal…
Repair torn and worn-out boots of suspension tie rod ends - without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5-point sealing action. Choose from four sizes and round or…
New Rag Joint steering couplers are carefully engineered to OE specifications. All units are complete with lower casting, rubber disk and mounting bolts already assembled for easy, trouble free installation. All units are carefully…
New Rag Joint steering couplers are carefully engineered to OE specifications. All units are complete with lower casting, rubber disk and mounting bolts already assembled for easy, trouble free installation. All units are carefully…
Best Quality Reproduction Power Steering Pressure Hose
For Big Block Applications
Correct Style High Pressure Hose
Correct Bends, Fittings
27-3/8 Inch Long Hose
Diameter End 1 (In): 3/8 Inch Male
Diameter End 2 (In)…
On some factory applications, a flexible coupling or Rag Joint was used to attach the column to the steering box when there was perfect alignment. If the original column or box is changed, the stock coupling may not work. Borgeson offers…
New Rag Joint steering couplers are carefully engineered to OE specifications. All units are complete with lower casting, rubber disk and mounting bolts already assembled for easy, trouble free installation. All units are carefully…
Shaft size: 3/4" fine spline without flat at bolt head side
Spline count: 32
Total OD: 3-5/32"
Bolt size: 5/16"
Bolt spacing: 2-3/8" center to center
Pin diameter: 5/16" & 3/8"
Pin spacing: 2-1/2" center to…
Restoration Correct Original AC Delco Part Correct Fit And Finish Fits V8 Engine Made In USA Got a leaking power steering hose on your 1970-1975 Chevelle or Malibu. A power steering pressure hose failure can be dramatic. Even a small hole…
A set of 1969 big block power steering brackets. Includes all three brackets needed to replace or add a new power steering pump correctly. Exact reproduction of original! Applications: 1969 Camaro with 396 and long water pump.i> 1969…
On some factory applications, a flexible coupling or Rag Joint was used to attach the column to the steering box when there was perfect alignment. If the original column or box is changed, the stock coupling may not work. Borgeson offers…
Stock Replacement This stock replacement power steering hose is manufactured by GM or by one of its authorized suppliers for use as a factory replacement part. You will find the fit, finish and function meets all GM specifications. …
Center Links – often called Drag Links – are the critical connection between the driver side and passenger side steering. Our Center Links feature the same ball joint technology that made them famous, ensuring that your vehicle…
Fits 64-67 models with 13/16" center linkFits 68-70 models with 7/8" center linkFits 71-72 modelsThe Idler Arm and Pitman Arm are two of the most commonly worn steering components. Poorly designed joints from the factory quickly loosen and…
Reproduction Of Original This Chevelle reproduction power steering bracket has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit, finish and function will work…
Reproduction Of Original This Chevelle reproduction pitman arm has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit, finish and function will work superbly for your…
Restoration Correct Original AC Delco Part Correct Fit And Finish Fits V8 Engine Made In USA Got a leaking power steering hose on your 1971-1975 El Camino. The El Camino Store offers this AC Delco replacement hose. A power steering…
Driver's Replacement Includes Mounting Hardware This Chevelle replacement idler arm has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit and function will work…
Best Quality Reproduction Power Steering Pressure Hose
For Big Block Applications
Correct Style High Pressure Hose
Correct Bends, Fittings, Protective Hose Sleeve
Male Inv. Flare Fittings
30-1/2 Inch Long…
Borgeson OEM Saginaw 525 series manual steering boxes are the true OEM gears built to the original specifications and drawings from Saginaw, not an off-shore copy. Each gear features a precision machined casting created from the original…
On some factory applications, a flexible coupling or Rag Joint was used to attach the column to the steering box when there was perfect alignment. If the original column or box is changed, the stock coupling may not work. Borgeson offers…