Rear sway bar end link for 2003–2012 Chevrolet, Pontiac, Saab and Saturn models designed to restore proper anti-roll performance and steering stability. This direct-fit right/left hand replacement secures the stabilizer bar to the suspension, reducing body roll, improving cornering response and eliminating clunking or looseness from worn links. Built with corrosion-resistant steel and resilient bushings, it delivers long-lasting reliability and straightforward installation for routine maintenance or restoration projects.
Features:
- Fits 2003–2012 Chevrolet, Pontiac, Saab and Saturn vehicles (rear sway bar link, right and left hand fitment).
- Durable steel construction with corrosion-resistant finish for extended service life.
- Precision bushings and hardware to secure the stabilizer bar and reduce vibration and noise.
- Restores proper suspension geometry and reduces body roll for improved handling.
- Direct-replacement part engineered for easy, bolt-on installation during routine maintenance or restoration.
Installation / Application:
- Difficulty: 2/5
- Estimated time: 30-60 minutes (both sides)
Instructions:
- Park on a level surface, engage parking brake and loosen rear wheel lug nuts slightly.
- Raise the rear of the vehicle with a floor jack and support securely on jack stands. Remove the rear wheel(s) to access the sway bar link.
- Locate the rear sway bar end link connecting the stabilizer bar to the control arm or strut.
- Apply penetrating oil to fasteners if corroded. Remove the nut(s) and/or bolts securing the upper and lower ends of the old link using appropriate sockets/wrenches.
- Remove the old end link. If seized, use a pry bar or carefully cut/press out the link as needed.
- Install the new sway bar link in the same orientation as the removed part. Insert bolts and hand-thread nuts to hold the assembly.
- Tighten fasteners to the vehicle manufacturer's torque specifications using a torque wrench. Do not overtighten bushings; tighten to spec to avoid premature wear.
- Reinstall the wheel, lower the vehicle, and torque lug nuts to the manufacturer's specification.
- Test drive at low speed to confirm the repair. Re-check fasteners after initial road use.
About Redline Select
Redline Restomotive® has established itself as a premier brand in the world of classic car restoration, providing enthusiasts with high-quality parts that meet the exacting standards of original manufacturer specifications. Dedicated to the preservation of American automotive history, Redline Restomotive® combines advanced manufacturing techniques with an in-depth understanding of vintage vehicles. The result is a range of products that seamlessly blend into the design and function of classic cars, giving restorers and collectors the assurance that each part reflects the era’s style, quality, and performance.
Redline Select® is our premium line of steering and suspension products for all vehicle makes and models including both North American and Import vehicles. We have partnered with an ISO 9001/QS9000/TS16949 certified manufacturing facility with more than 40 years of experience in producing components that perform to the standards our customers expect. Our steering and suspension parts are backed by multiple quality control checks along the way—during production, prior to shipping from the factory, and at arrival. With our ISO 9001:2015 certification, we observe the world’s highest standards for quality management.
Vehicle Fitment:
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
| Make |
Model |
Years |
| Chevrolet |
Malibu |
2004 - 2012 |
| Pontiac |
G6 |
2005 - 2010 |
| Saab |
9-3 |
2003 - 2011 |
| Saturn |
Aura |
2007 - 2009 |
