×

PLEASE NOTE: As of August 1, 2023 our Windsor location will no longer be open for Walk-In Traffic

877.454.7792 Contact Us Mon-Fri 10a-6p & Sat 10a-3p EST
DRIVEN BY CARE

Weiand X-CELerator Intake Manifold 7547-1

Weiand X-CELerator Intake Manifold 7547-1
Weiand X-CELerator Intake Manifold 7547-1Weiand X-CELerator Intake Manifold 7547-1Weiand X-CELerator Intake Manifold 7547-1
$422.99 ea
NEWARRIVING SOONEstimated Ship Date 10/23/2023 (If Ordered Today)290 available from HOLLEY PERFORMANCE PRODUCTS as of 09/30/2023
Model: 4016511
Select a Vehicle or refer to the Vehicle Fitment Tab below to verify that this part fits your vehicle.
STANDARD
DELIVERY
This Weiand X-CELerator manifold was specifically designed with the IMCA racer in mind. It is fully legal for use in IMCA Stock Car and Sportmod Competition! This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appearance imperfections that do not affect the functionality of the part. These minor blemishes are a natural part of the casting process when using the original sand casting tooling. Weiand Nostalgia series intakes are proudly cast and machined in the USA. We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. There is no need to search for that vintage intake at swap meets or on the internet when you can buy the real deal new from Weiand!
Features:
  • Single Plane Design
  • Square Flange Carburetor Mounting
  • IMCA Approved
  • Power Band 2500-7000 RPM
  • Height 3.09 in. Front; 4.06 in. Rear
  • Port Size 1.85 in. Height x 1.15 in. Width
  • No Provision For Divorced Or Hot Air Choke
Holley Performance Emission Code 3: This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles and Racing Use Only Vehicles. The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles: 1965 and older U.S. manufactured California Certified vehicles/1967 and older U.S. manufactured Federally Certified vehicles/1967 and older Foreign manufactured vehicle. The following vehicles are considered Racing Use Only Vehicles: Racing Use Only Vehicles are vehicles that are used exclusively for competition and that are not registered and that may never be used on the street. WARNING: It is against the law to install this part on an Emissions Controlled Vehicle. The following vehicles are considered Emissions Controlled Vehicles: 1966 and newer U.S. manufactured California Certified vehicles/1968 and newer U.S. manufactured Federally Certified vehicles/1968 and newer Foreign manufactured vehicle
About Weiand

The Weiand Company was founded by Phil Weiand as a performance parts warehouse in the 1930s and sold a variety of speed parts. The first Weiand product, the "High Weiand" manifold was manufactured and marketed in 1937. It was the first aluminum intake on the market.

In 1949 Weiand introduced a series of "tri-power" and four 2-barrel manifolds and immediately after WWII Weiand debuted a line of aluminum cylinder heads for flathead Ford engines. The famous "Drag Star" line of "log" manifolds for Hemi engines was introduced in 1952 and in 1957 Weiand developed complete blower drives for the GMC 6-71 supercharger. The first dual plane, 180º intake came from Weiand in 1965, known as the "Colt" and in 1968 Weiand introduced the "Hi-Ram Manifold" and its patented D-port technology.

The popular "X-terminator" single plane manifold series was launched in 1972 and high performance aluminum water pumps were made by Weiand the following year. "X-CELerator", a series of performance single plane intakes was developed in 1974. The first models of the famous "Team G" series of 360º racing manifolds were introduced in 1978. A year later Weiand's "Action" series of high performance replacement manifolds debuted.

Weiand became the first OE supplier of superchargers to Mercury Performance Marine in 1990, and over the next three years the "Stealth" series of high performance dual plane manifolds was designed, the "Pro-Street" supercharger was certified "emissions legal" by CARB and Weiand received the industry's first "E.O." for an intake manifold.

Weiand developed the 8-71 supercharger for Small Block and Big Block Chevy in 1996 and Weiand released the first aluminum LS-1 intake manifold in 2002. In 2005 Weiand began designing manifolds on Computational Fluid Dynamics software to deliver perfectly designed runner lengths for maximum air/fuel delivery on its newest intakes known as the Warrior line.

To make more power you have to get more air into your engine. Look to Weiand as your power source!

Downloads:

Download Name File Size
w537rev.pdf82.77KB
199r11127.pdf6.43MB
w504rev1.pdf166.38KB

Videos:

Vehicle Fitment:

The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
Make Model Years Engine Fitment Notes
Buick Skylark 1977 5.0L / 305 / V8
5.7L / 350 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Buick Skylark 1978 5.0L / 305 / V8
5.7L / 350 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Buick Skylark 1979 5.0L / 305 / V8
5.7L / 350 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet Chevelle 1964 5.3L / 327 / V8
4.6L / 283 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet Chevelle 1965 5.3L / 327 / V8
4.6L / 283 / V8
5.4L / 327 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet Chevelle 1966 5.3L / 327 / V8
4.6L / 283 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet Chevelle 1967 5.3L / 327 / V8
4.6L / 283 / V8
5.4L / 327 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet Chevelle 1968 5.3L / 327 / V8
5.0L / 307 / V8
5.4L / 327 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet Chevelle 1969 5.0L / 307 / V8
5.7L / 350 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet Chevelle 1970 5.0L / 307 / V8
6.6L / 400 / V8
5.7L / 350 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet Chevelle 1971 5.0L / 307 / V8
6.6L / 400 / V8
5.7L / 350 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet Chevelle 1972 5.0L / 307 / V8
5.7L / 350 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet Chevelle 1973 5.0L / 307 / V8
5.7L / 350 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet El Camino 1964 5.3L / 327 / V8
4.6L / 283 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet El Camino 1965 5.3L / 327 / V8
4.6L / 283 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet El Camino 1966 5.3L / 327 / V8
4.6L / 283 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet El Camino 1967 5.3L / 327 / V8
4.6L / 283 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet El Camino 1968 5.3L / 327 / V8
5.0L / 307 / V8
5.4L / 327 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet El Camino 1969 5.3L / 327 / V8
5.0L / 307 / V8
5.7L / 350 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet El Camino 1970 5.0L / 307 / V8
6.6L / 400 / V8
5.7L / 350 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet El Camino 1971 5.0L / 307 / V8
5.7L / 350 / V8
6.6L / 400 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet El Camino 1972 5.0L / 307 / V8
5.7L / 350 / V8
6.6L / 400 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet El Camino 1973 5.0L / 307 / V8
5.7L / 350 / V8
6.6L / 400 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet El Camino 1974 6.6L / 400 / V8
5.7L / 350 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet El Camino 1975 5.7L / 350 / V8
6.6L / 400 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet El Camino 1976 5.0L / 305 / V8
5.7L / 350 / V8
6.6L / 400 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet El Camino 1977 5.0L / 305 / V8
5.7L / 350 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet El Camino 1978 5.0L / 305 / V8
5.7L / 350 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet El Camino 1979 4.4L / 267 / V8
5.0L / 305 / V8
5.7L / 350 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet El Camino 1980 4.4L / 267 / V8
5.0L / 305 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet El Camino 1981 4.4L / 267 / V8
5.0L / 305 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet El Camino 1982 4.4L / 267 / V8
5.0L / 305 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet El Camino 1983 5.0L / 305 / V8 Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet El Camino 1984 5.0L / 305 / V8 Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet El Camino 1985 5.0L / 305 / V8 Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet El Camino 1986 5.0L / 305 / V8 Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet El Camino 1987 5.0L / 305 / V8 Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet Laguna 1973 5.7L / 350 / V8 Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet Laguna 1974 6.6L / 400 / V8
5.7L / 350 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet Laguna 1975 5.7L / 350 / V8
6.6L / 400 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet Laguna 1976 5.0L / 305 / V8
5.7L / 350 / V8
6.6L / 400 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet Malibu 1964 5.3L / 327 / V8
4.6L / 283 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet Malibu 1965 5.3L / 327 / V8
4.6L / 283 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet Malibu 1966 5.3L / 327 / V8
4.6L / 283 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet Malibu 1967 5.3L / 327 / V8
4.6L / 283 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet Malibu 1973 5.0L / 307 / V8
5.7L / 350 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet Malibu 1974 6.6L / 400 / V8
5.7L / 350 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet Malibu 1975 5.7L / 350 / V8
6.6L / 400 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet Malibu 1976 5.0L / 305 / V8
5.7L / 350 / V8
6.6L / 400 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet Malibu 1977 5.0L / 305 / V8
5.7L / 350 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet Malibu 1978 5.0L / 305 / V8
5.7L / 350 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet Malibu 1979 4.4L / 267 / V8
5.0L / 305 / V8
5.7L / 350 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet Malibu 1980 4.4L / 267 / V8
5.0L / 305 / V8
5.7L / 350 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet Malibu 1981 4.4L / 267 / V8
5.0L / 305 / V8
5.7L / 350 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet Malibu 1982 4.4L / 267 / V8
5.0L / 305 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Chevrolet Malibu 1983 5.0L / 305 / V8 Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Oldsmobile Cutlass 1978 5.0L / 305 / V8
5.7L / 350 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Oldsmobile Cutlass 1979 5.0L / 305 / V8
5.7L / 350 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Oldsmobile Cutlass 1980 5.0L / 305 / V8 Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Pontiac Grand Prix 1978 5.0L / 305 / V8 Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Pontiac Grand Prix 1979 5.0L / 305 / V8 Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Pontiac Grand Prix 1980 5.0L / 305 / V8 Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Pontiac Grand Prix 1983 5.0L / 305 / V8 Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Pontiac Grand Prix 1984 5.0L / 305 / V8 Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Pontiac Grand Prix 1985 5.0L / 305 / V8 Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Pontiac Grand Prix 1986 5.0L / 305 / V8 Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Pontiac Grand Prix 1987 5.0L / 305 / V8 Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Pontiac LeMans 1977 5.0L / 305 / V8 Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Pontiac LeMans 1978 5.0L / 305 / V8
5.7L / 350 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Pontiac LeMans 1979 5.0L / 305 / V8
5.7L / 350 / V8
Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing
Pontiac LeMans 1980 5.0L / 305 / V8 Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Legal Only For Off-Highway Use Or Racing

Specifications:

Barrel Four
Barrels 4
Construction Cast
Cylinder Head Type Standard
Emission Without EGR
Emission Code 3
Engine Chevrolet Small Block Gen I
Engine Make/Size Chevy Small Block V8
Finish Satin
Front Height 3.090 in.
Fuel System Type Carb
Manifold Type High Rise
Number of Carbs One
Part Type Engine Intake Manifold
Position Upper
Rear Height 4.060 in.
RPM Power Band 2500-7000
RPM Range 2500-7000
Usage Street/Strip

Reviews:

Write a Review
* Your Name:
* Email (This will not be displayed)
* Rating:
Comments:

Ask a question about

Weiand X-CELerator Intake Manifold 7547-1:
Chevelle Depot 2023