OVERSIZE 1All CPP control arms feature high quality TIG welds to ensure the best strength and appearance. The arms accept OE replacement ball joints.The CPP exclusive pivot bushings are a patented self lubricating plastic that will not squeak, and has a working temperature of over 400 degrees. These plastic bushings refuse to break during impact testing and can absorb high shocks loads that would otherwise be transferred thru the chassis.
The front upper control arms are preassembled on new billet chromolly 4130 cross shafts and pivot sleeves. CPP is leading the industry with billet cross shaft and pivot sleeves that captures both sides of the bushing, unlike the originals that were only retained on the 1 side of the bushing under the head of the bolt. As a result of the fully contained bushings, the arms are even stronger. Forces that would make other arms flex and twist are transferred through the bushings and easily handled by billet cross shaft. CPP created a safety feature with an interlocking shaft and sleeve design that prevents the bolts from working loose even under severe stress created by hard corning. The arms are made from 1-1/4” 120 wall DOM tubing and have beefy 1-1/2” 188 wall pivot barrels. The continuous round cross section adds torsional rigidity. The beefy 1-1/2 .188 wall pivot barrels ensure the pivots will stay true and operate with maximum efficiency.
NOTE: Image Shown in Silver, only Available in Black
| Make | Model | Years |
| Chevrolet | Chevelle | 1964 - 1972 |
| Chevrolet | Malibu | 1964 - 1967 |
