Your shopping cart is empty!
DRIVEN BY CARE
-
My Account Sign In / Register
×
Select Your Vehicle to Shop for the Correct Parts:
Show More Filters
Since 1982, we have been producing exceptional quality restoration parts for the industry. Fast forward to today, and our manufactured line now numbers in the thousands. The demand for precise quality reproductions continues to grow, and the RESTOPARTS® brand proudly answers that demand with an ever expanding line of the finest quality restoration parts available today.
1-36 of 3390 results for RestoParts : All Productsgo
Sort by
Show
Show results for
Refine By
Availability
On Sale
Condition
Price
Under $10 (74)$10 to $25 (229)$25 to $50 (570)$50 to $100 (388)$100 to $250 (892)$250 to $500 (517)$500 & Above (720)
$ to $ go
Manufacturer
Show Less Filters
Model: 3022495
Condition: NEW
These convenient kits include upper and lower support bushings and are shipped complete with the original steel mounting washer and bolt hardware kits, if so desired.
Radiator Support Bushings Reproduction-Style…
Model: 3434064
Condition: NEW
These are the excellent reproductions to replace cracked or worn originals behind the hood, under the cowl.
Insert, Cowl Grille, 1968-72 Without Air Conditioning.
Our precise reproductions are not universal. These are the correct…
Model: 3435914
Condition: NEW
There is simply no comparison to our entirely authentic mirrors for 1970-72. Precision-tooled base is an identical recreation to the factory originals. Compared to others offered, ours is superior in many very important ways. For…
Model: 3433843
Condition: NEW
Each knob is precisely reproduced in injection-molded plastic and is identical to the "showroom-new" originals.
Knobs, Door Lock, 1968-77 Chrome, Ribbed, Pair.
Complete kits include lock knobs and ferrules, which are identical to…
Model: 3435915
Condition: NEW
There is simply no comparison to our entirely authentic mirrors for 1970-72. Precision-tooled base is an identical recreation to the factory originals. Compared to others offered, ours is superior in many very important ways. For…
Model: 3434050
Condition: NEW
This pad runs the length of the firewall in the interior and behind the dash. This will help eliminate much of the engine noise caused by dried-out existing insulation. The pad features heavy-duty jute insulation with a stamped rubber…
Model: 3434405
Condition: NEW
This is a four-piece assembly featuring die-cut insulation that goes between the roof and the headliner on the inside of the roof panel to insulate the interior from heat and cold, as well as deaden noise and vibrations. Adheres using our…
Model: 3435848
Condition: NEW
Factory-correct replacement. Your satisfaction is guaranteed.
Interior Dome Lens Sedan Center.
Our replacements even include the factory color-keyed lenses in original "eggshell", off-white or white where applicable!
Part#…
Model: 1007337
Condition: NEW
This molded plastic grommet is an identical reproduction of original equipment and is designed to keep the accelerator cable from pulling through the pedal linkage. Sold per each, the grommet snaps into the accelerator pedal linkage and is…
Model: 3435335
Condition: NEW
This reproduction license plate lamp assembly is identical to original equipment installed on 1965-72 GTO, Tempest and LeMans models. Each assembly features a stamped-steel housing that is plated in the correct gold-cadmium for an…
Model: 3028204
Condition: NEW
When replacing your headliner, don't take a chance with old, brittle clips. OPGI has just what you need to keep your headliner bows in place. Two different styles are available depending on your application needs. The large clips are for…
Model: 3434105
Condition: NEW
A complete assembly. This high-quality, chrome-plated reproduction includes spring and baseplate.
Strato Bucket Seatback Lock Button.
Convenient to order and easy-to-install! In stock for immediate delivery
…
Model: 3029212
Condition: NEW
Stainless steel reproductions of the end caps are used with our seatback and base chrome strip kit. Available individually or in a convenient twelve-piece kit.
Seat Chrome Strip End Caps (12-Pcs.).
For use with bucket seatback and…
Model: 3022496
Condition: NEW
These convenient kits include upper and lower support bushings and are shipped complete with the original steel mounting washer and bolt hardware kits, if so desired.
Radiator Support Bushings Reproduction-Style…
Model: 3434153
Condition: NEW
Reproduction rubber door handle and lock gaskets are available for a variety of applications. Gaskets aid in proper fitment of the handles and lock cylinders as well as prevent damage to your paint.
Outside Door Handle & Trunk…
Model: 3434166
Condition: NEW
ALL KITS INCLUDE ? Base, lens and wire leads. S230226 includes base, lens, bulb and socket.
Dome Light Kits Center.
Everything necessary in one package
Part# DLK004 and S240609 requires two per car.
…
Model: 3043840
Condition: NEW
Tailgate & Rear Bed Panel Screw & Fastener Kit.…
Model: 3434465
Condition: NEW
Exact reproduction of the factory console brackets.Console Mounting Brackets All.Replace your old, bent or broken original with one of these…
Model: 3434451
Condition: NEW
These factory-style speedometer cable seals fit the original hole in the firewall and protects the cable itself from chaffing on the metal. Another benefit of this seal is to keep wind and engine heat out of the cab area. Each grommet is…
Model: 3434046
Condition: NEW
Our premium-quality wire routing gutter is ideal for a clean appearance along your firewall. The gutter is manufactured from heavy-duty extruded plastic and built to withstand the heat of your engine compartment.Firewall Wire Routing…
Model: 3434705
Condition: NEW
These fine-tooled and stamped panels are produced in original factory-grade sheet metal. The full quarters cover the door jamb and trunk channel and flange up to the bottom of the sail panel by about a half-inch. The 86" x 25" panels run…
Model: 3434173
Condition: NEW
Your interior deserves the finest quality reproduction armrest bases. We deploy a premium chrome-plating process that guarantees you a brilliant, long-lasting chromed surface. Don't settle for cheaper-quality vacuum-metalized bases found…
Model: 3434154
Condition: NEW
These U-shaped, molded rubber seals are professionally injection-molded unlike others found elsewhere. Our process is identical to the original produced by GM.
U-Shaped Door Jamb Seals.
Located in the upper door jamb and rear…
Model: 3027054
Condition: NEW
This contoured part is made from a steel rule injection-mold. It is identical to the original and superior to many of our competitors' versions (ours being injection-molded, theirs being a flat-stamped piece).Console Shifter Slider…
Model: 3026992
Condition: NEW
These are the inserts, on top of the console, on both sides of the shifter. Made from die-cast metal or injection-molded plastic, these flawless duplicates of the GM originals are chromed and painted with black inserts. Your satisfaction…
Model: 3435263
Condition: NEW
Stamped from heavy-gauge steel, these authentically reproduced brackets include all of the necessary mounting studs and receivers to keep your seat in place. Brackets are available for front or rear seats as well as in a convenient…
Model: 3434859
Condition: NEW
Console Wiring HarneSS Retainer Clips (Three Required).Fits on the lower core support…
Model: 3436012
Condition: NEW
These complete kits include exact reproductions of the original rubber bumpers found on the doors, trunk lid, hood, side of hood, gas tank door and interior glove box. Does not include tailgate bumpers.Rubber Stopper Kits.Replace your…
Model: 3434392
Condition: NEW
Heavyweight steel battery trays are manufactured to OEM specifications for fit and finish. Each tray features all of the correct ribs and flanges as well as the necessary holes for mounting and retaining. Early trays are shipped raw, while…
Model: 3025827
Condition: NEW
We introduced 1967 Chevelle rear end panel moldings into reproduction in 1988. Since then, we've sold thousands of them to satisfied Chevelle owners everywhere. These are premium-quality (T3 aluminum) extruded reproductions of the…
Model: 3435516
Condition: NEW
These are the small aluminum moldings that go between the headlights. Two required per car.In Between Headlight Moldings.Exact extruded and formed aluminum reproduction that's identical to factory GM originals…
Model: 3434312
Condition: NEW
This "no-nonsense" reproduction is carried into the thousands in our inventory.
Battery Tray Clamps Stainless Steel.
6677 Chevelle and El Camino
1966-77 cars require one of part# CH20306 for use with part# PZ00585 or G241767.
…
Model: 3434160
Condition: NEW
Brighten up your interior by replacing your existing faded dome light base with the bright reflective light of a new one.Dome Light Chrome Base.For all 6477 Chevelles and El Caminos…
Model: 3097208
Condition: NEW
These grommets fit into pre-existing 1-1/4" to 2-1/4" holes in the firewall and keep the accessory wires where they belong. Reproduced to original specs, the grommets are used for routing heater and AC wires, power window wiring or any…
Model: 3434243
Condition: NEW
Die-stamped rubber A-arm seals fasten to the inner fenderwells and prevent dirt and debris from entering the engine compartment. These rubber seals are designed to replicate factory fit and function and install in the original location…
Model: 3028665
Condition: NEW
These end caps are exact reproductions of the now obsolete GM versions. It works perfectly with our headliner seal strips for Chevelles except CHV4823, which also fits 1964-67 El Camino.Rear Window Trim Caps 2-Door Coupe Middle.These…