These disc brake spindle brackets will work with the stock spindles on full size Chevrolet models from 1955-64. Use these to upgrade to front disc brakes using 11" GM rotors and small GM calipers from intermediate GM models. Not for use on drop spindles and not for use on Buick, Olds or Pontiac models. Will work on 5 X 4-3/4" bolt patterns, and with most 14" wheels that are intended for disc brakes. Will increase track width 3/8" per side or 3/4" overall width.
Chevrolet ApplicationsNote: Image is for illustrative purposes only. Actual set may be slightly different in appearance and content.
| Make | Model | Years |
| Chevrolet | Bel Air | 1955 - 1964 |
| Chevrolet | Biscayne | 1958 - 1964 |
| Chevrolet | Brookwood | 1958 - 1961 |
| Chevrolet | Del Ray | 1957 - 1958 |
| Chevrolet | Impala | 1958 - 1964 |
| Chevrolet | Kingswood | 1959 - 1961 |
| Chevrolet | Nomad | 1955 - 1961 |
| Chevrolet | One-Fifty Series | 1955 - 1957 |
| Chevrolet | Parkwood | 1959 - 1961 |
| Chevrolet | Two-Ten Series | 1955 - 1957 |
| Chevrolet | Yeoman | 1958 |
| Height | 13 in |
| Length | 4 in |
| Weight | 9 lbs |
| Width | 10 in |
