Replaces Often Leaky Rear End Gaskets Critical For Retaining Differential Oil This Chevelle replacement differential gasket has been manufactured to meet or exceed factory specifications and performance. You will find the fit and function…
Secure your differential pinion flange with this U-bolt and mounting hardware set, designed for 1964-1970 GM cars. This factory-correct set includes durable U-bolts and hardware to ensure a precise fit and reliable attachment of the pinion…
Add some bling to the underside of your car with Mr. Gasket's chrome differential cover. This chrome-plated steel cover is made to fit GM 10-bolt with 8 1/2 in ring gear. Is a complete kit with a gasket and bolts.
Features:
Made…
This manual supplements the Service Manual to assist in major components that must be removed from the vehicle for service or repair. It explains how to disassemble, overhaul and reassemble major components in these vehicles. It includes…
Replaces Often Leaky Rear End Gaskets Critical For Retaining Differential Oil This Chevelle replacement differential gasket has been manufactured to meet or exceed factory specifications and performance. You will find the fit and function…
Reproduction Of Original This El Camino reproduction breather valve has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit, finish and function will work superbly for…
Replaces Often Leaky Rear End Gaskets Critical For Retaining Differential Oil This El Camino replacement differential gasket has been manufactured to meet or exceed factory specifications and performance. You will find the fit and function…
The 1964-1981 GM Car 12-Bolt Differential Cover Screws are precision hardware replacements designed to secure the rear axle cover on GM vehicles equipped with a 12-bolt rear differential. Featuring the correct thread pitch, length, and…
Mr. Gasket Differential Cover Gaskets offer simple, no silicone installation. They use an aluminum carrier, silicone elastomer beading and a rubber coated binder to create a strong, long lasting seal perfect for the demands of factory or…
This manual supplements the Service Manual to assist in major components that must be removed from the vehicle for service or repair. It explains how to disassemble, overhaul and reassemble major components in these vehicles. It includes…
This manual supplements the Service Manual to assist in major components that must be removed from the vehicle for service or repair. It explains how to disassemble, overhaul and reassemble major components in these vehicles. It includes…
Manufactured To OE Specifications Stamped Steel Rubber Lip TO Keep Oil From Coming Out With Spring Tensioner Made In The USA Two Required El Camino rear axle bearing seals are a must-have item when embarking on your 1964-1988 El Camino…
Ensure a secure and leak-free seal for your 10-bolt differential cover with this set of screws, designed for 1964-1981 GM cars. These factory-correct screws provide a precise fit, maintaining the integrity and functionality of your…
Reproduction Of Original This Chevelle reproduction heater hose brackets has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit, finish and function will work superbly…
Higher Performance Than OE Additive
Modifies Clutch Pack Friction To Surpass Original GM Requirements
Eliminate Noise, Vibration and Harshness Associated With Limited Slip Differentials
Works With All Standard Clutch…
Fluid Cooler, Transmission, Tube, Fin, Natural, 7.5 in. x 12.5 in. x 0.75 in., 3/8 in. Inlet, Outlet, Each
Part Type:Fluid Coolers
Overall Height (in):7.500 in.
Overall Width (in):12.500 in.
Overall Thickness (in):0.750 in…
Correct Reproduction Sand Cast Then Machined Like Original Replaces 3879208 Pinion Flange Will Not Work On 10 Bolt Rear Ends Includes Correct Black Oxide Bolts Includes Correct ?Flat? Style U-Bolts Only Fits 1330 Style Yokes (3-5/8…
Reproduction positraction differential fill plug for vehicles equipped with either a 10 bolt or 12 bolt positraction differential. This plug will replace the old or worn out original. This is the hard to find 3/4" rear end pipe plug that…
Mr. Gasket Axle Housing/Differential Cover or Rear End Gaskets are manufactured from a .047 inch thick cellulose/nitrile composite gasket material for excellent sealing and durability. They are precision die-cut for an excellent fit. Fits…
Reinforced lightweight aluminum rear end covers designed to strengthen the rear housing case in heavy torque situations. The PERFECT LAUNCH logo is prominently displayed on a precision milled surface. Each cover includes two bolts to…
These Builder Series tailpipes are constructed from 3.00-inch mandrel-bent 16-gauge aluminized steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit straight-out the back under the rear bumper. Designed to…
Reproduction of the original rear end positraction tag designed for use on various Buick, Chevrolet, Oldsmobile, and Pontiac models with 12 bolt positraction differentials. Each tag is manufactured in molded plastic to GM specifications in…
Stiffen up your rear suspension with an original style sway bar from RESTOPARTS. Manufactured from premium quality solid steel stock, each bar is precisely formed to replicate the original equipment offered by General Motors. The center…
Reproduction of original GM 12 bolt cover without edge notch (found on service replacements), just as originally equipped. Officially Licensed GM Restoration Parts from Classic Headquarters.
…
The Mr. Gasket chrome plated rear end cover is made from heavy-gauge steel and comes complete with bolts and gaskets.
Features:Chrome plated steel for looksIncludes bolts and gasket
…
Mr. Gasket Axle Housing/Differential Cover or Rear End Gaskets are manufactured from a .047-inch thick cellulose/nitrile composite gasket material for excellent sealing and durability. They are precision die-cut for an excellent fit. Fits…
Mr. Gasket Axle Housing/Differential Cover or Rear End Gaskets are manufactured from a .047 inch thick cellulose/nitrile composite gasket material for excellent sealing and durability. They are precision die-cut for an excellent fit. Fits…
These Builder Series tailpipes are constructed from 2.50-inch mandrel-bent 16-gauge stainless steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit straight-out the back under the rear bumper. Designed to…
Earls new premium quality UltraPRO oil coolers are ideal for all high performance applications. These aluminum stacked plate style coolers are made using state of the art brazing techniques for a durable and long lasting premium cooler…
OER reproduction bolt used to install the lower control arms on various GM models. Fits front lower control arms. The bolts are made from high strength grade 8 steel which as been formed and thread rolled to exact OE specs with correct…