Left-hand quarter panel skin for 1970-1972 Chevrolet Chevelle designed to replace damaged, rusted, or dented outer quarter sections. This stamped steel replacement restores original body contours and panel alignment, returning structural support, protecting against further corrosion, and delivering a factory-correct appearance. Built for restoration projects and collision repairs, it offers long-term durability and reliable fitment when properly installed and finished.
Features:
- Fits 1970-1972 Chevrolet Chevelle — left hand (driver side) outer quarter panel skin.
- Stamped steel construction formed to match original factory contours for accurate alignment.
- Restores structural integrity and exterior appearance after rust damage or collision.
- Provides a solid replacement platform for welding, priming, and finishing during restorations.
- Requires welding and finishing; designed for professional or experienced DIY installation for best results.
Installation / Application:
- Difficulty: 4/5
- Estimated time: 4-8 hours (varies with experience and extent of rust/collision repair)
Instructions:
- Prepare vehicle: disconnect battery, remove trim, tail lamp, inner panels, and any components blocking access to the quarter panel.
- Assess and remove damaged metal: cut out the rusted or dented outer panel while preserving as much original flange and inner structure as possible.
- Test-fit the new panel skin: align the replacement to existing flange lines and mounting points; trim as needed for proper fit.
- Clamp and tack-weld: secure the panel in multiple points and check body gaps and alignment with doors/rocker/tail area before final welding.
- Complete welding: stitch or plug weld at factory locations to join the panel to the inner structure, avoiding excessive heat to prevent warping.
- Grind welds and finish seams: smooth welds, apply seam sealer to seams and seams where moisture could enter, and treat exposed metal with rust inhibitor.
- Body finishing: apply body filler where necessary, sand to smooth, prime with epoxy or etch primer, and complete with paint and clear coat to match vehicle.
- Reassemble: reinstall any removed trim, lights, and interior panels, then inspect alignment and corrosion protection for completeness.
Vehicle Fitment:
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
| Make |
Model |
Years |
| Chevrolet |
Chevelle |
1970 - 1972 |
