STANDARDQuality Reproduction Stamped Steel Semi-Gloss Black For Man Fits Small Block & Big Block Applications Using An 11 Bellhousing & 168 Tooth Flywheel For 1964-1977 El Camino Models With Manual Transmissions Whether you are hearing unwanted rattling vibrations from your transmission, or you're starting to experience clutch failure, chances are that you are in great need of a new flywheel bellhousing dust cover plate for your 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, or 1977 small block or big block El Camino with an 11 clutch and manual transmission. Without a dust cover inspection plate or with one that is very worn down, your ring gear is exposed to constant dirt and road debris. Over time, debris and other objects can clog up your flywheel and clutch area, causing premature clutch failure. Clutch failure in your Chevrolet can be reported from a feeling of slipping, where the clutch does not fully engage or disengage. Further wear on your clutch can cause overheating until the clutch will eventually fail altogether, which can be a dangerous situation. The El Camino Store offers this 621 style flywheel bellhousing dust inspection cover plate, made from stamped steel with a black glossy finish. This reproduction metal plate attaches to the bellhousing and promises to protect the flywheel and clutch from any future road debris. This dust shield will also keep outside debris away from your ring gear and flexplate. You will not have to remove your transmission to apply a new dust cover inspection plate, so installation should be simple and effective. From racers, show cars, hot rods, and daily drivers, you can trust The El Camino Store or all of your restoration and replacement needs for your 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, or 1977 Chevrolet El Camino!
| Make | Model | Years |
| Chevrolet | El Camino | 1964 - 1977 |
