This 7/8" rear sway / stabilizer bar is a direct-fit upgrade for 1964-1972 GM A-Body vehicles built to F-41 handling specifications. It reduces body roll, improves rear-end stability and cornering balance, and restores the car's original sport-tuned handling characteristics. Built from high-strength steel with a corrosion-resistant finish, the bar offers durable, long-lasting performance and reliable operation. Designed for bolt-on installation, it is an ideal replacement for worn or missing factory rear sway bars during restorations or performance upgrades.
Features:
- Fitment: 1964-1972 GM A-Body vehicles (F-41 style)
- 7/8" diameter high-strength steel construction for increased rear roll stiffness
- Corrosion-resistant finish improves longevity and resale appearance
- Improves handling by reducing body roll and stabilizing the rear during cornering
- Direct-fit geometry for factory mounting points; works with stock or aftermarket links
- Ideal for restoration projects or as a performance-oriented replacement
Installation / Application:
- Difficulty: 2/5
- Estimated time: 1-2 hours
Instructions:
- Park on a level surface, engage parking brake, and safely lift the rear of the vehicle with a floor jack; support on jack stands.
- Apply penetrating oil to end link and bushing bracket fasteners, allow to soak if corroded.
- Remove the rear sway bar end links from the axle or control arms.
- Unbolt the bushing bracket(s) that secure the sway bar to the chassis and lower the old bar out of the vehicle.
- Compare the old bar to the new 7/8" unit and transfer any required hardware or install new bushings onto the replacement bar as needed.
- Position the new sway bar in place, loosely install the bushing brackets to hold it, then attach the end links to the axle or control arms.
- With all components in place, torque bushing bracket and end link fasteners to OEM specifications.
- Lower the vehicle, perform a low-speed test drive to verify proper operation and clearance, then recheck fastener torque after initial use.
Vehicle Fitment:
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
| Make |
Model |
Years |
| Buick |
GS |
1970 - 1972 |
| Buick |
Skylark |
1964 - 1972 |
| Chevrolet |
Caprice |
1966 - 1972 |
| Chevrolet |
Chevelle |
1964 - 1972 |
| Chevrolet |
El Camino |
1964 - 1972 |
| Chevrolet |
Malibu |
1964 - 1967 |
| Chevrolet |
Monte Carlo |
1970 - 1972 |
| Oldsmobile |
442 |
1964 - 1971 |
| Oldsmobile |
Cutlass |
1964 - 1972 |
| Pontiac |
GTO |
1964 - 1972 |
| Pontiac |
Grand Prix |
1964 - 1972 |
| Pontiac |
LeMans |
1964 - 1972 |
| Pontiac |
Tempest |
1964 - 1970 |
