×

WE ARE CURRENTLY EXPERIENCING DIFFICULTIES WITH OUR PHONE LINES.  PLEASE UTILIZE CHAT OR EMAIL TO CONTACT US UNTIL THIS IS RESOLVED.

877.454.7792 Contact Us Mon-Fri 8a-9p & Sat 10a-3p EST
DRIVEN BY CARE

Weiand Pro-Street SuperCharger Kit 6500-1

Weiand Pro-Street SuperCharger Kit 6500-1
Weiand Pro-Street SuperCharger Kit 6500-1
$4,049.99 ea
NEWBackordered until 10/08/2021Out of stock at HOLLEY PERFORMANCE PRODUCTS as of 09/22/2021
Model: 4016327
Select a Vehicle or refer to the Vehicle Fitment Tab below to verify that this part fits your vehicle.
STANDARD
DELIVERY
STORE PICKUP
[More Info]
Weiand Pro Street supercharger kits are engineered to give you a 25% to 40% gain in power - while maintaining outstanding streetability. All Weiand blowers feature 100% new parts (no remanufactured components), including new thick-wall cases and rotors to eliminate high-RPM flex. *** Will work with three V-belt accessory drive pulley systems. Not compatible with serpentine accessory drive systems. Long nose kits fit most short and long water pump applications. Slight elongation of four center holes may be required for 1987 and later cylinder heads. Will not fit 1984 to present Corvette due to rack and pinion clearance problems. Will not fit 1992 or later LT1 engines. For Vortec or Fast burn heads see 6542-1 or 6543-1.
Features:
  • Develop 400 To 450 Plus Horsepower
  • Low Profile Design For Good Conscious Rodders
  • Increases Torque For Heavy Cars And Towing Apps.
  • Great Power Adder For Low Compression Crate Motors
  • Various Snout Lengths For Different V-Belt Arngm.
  • Full Time Power Every Time You Hit The Gas
  • w/No Lag
  • 100% Tested
Holley Performance Emission Code 5: This part is legal for sale or use on Emissions Controlled Vehicles; Uncontrolled (Non-Emissions Controlled) Vehicles; and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations
Installation Notes:
Will work with three V-belt accesory drive pulley systems. Not compatible with serpentine accesory drive systems. Long nose kits fit most short and long water pump applications. Slight elongation of four center holes may be required for 1987 and later cylinder heads. Will not fit 1984 to present Corvette due to rack and pinion clearance problems. Will not fit 1992 or later LT1 engines. For Vortec or Fast burn heads see 6542-1 or 6543-1.

About Weiand

To make more power you have to get more air into your engine. Look to Weiand as your power source, or partner with products from other Holley companies, to give you even more power.

Downloads:

Download Name File Size
w537rev.pdf82.77KB
199r10244-1.pdf597.42KB
techlibrary_supercharger_tech_info.pdf114.59KB

Videos:

Vehicle Fitment:

The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
Make Model Years Engine Fitment Notes
Buick Skylark 1977 5.0L / 305 / V8
5.7L / 350 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Buick Skylark 1978 5.0L / 305 / V8
5.7L / 350 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Buick Skylark 1979 5.0L / 305 / V8
5.7L / 350 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Chevrolet Chevelle 1964 5.3L / 327 / V8
4.6L / 283 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Chevrolet Chevelle 1965 5.3L / 327 / V8
4.6L / 283 / V8
5.4L / 327 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Chevrolet Chevelle 1966 5.3L / 327 / V8
4.6L / 283 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Chevrolet Chevelle 1967 5.3L / 327 / V8
4.6L / 283 / V8
5.4L / 327 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Chevrolet Chevelle 1968 5.3L / 327 / V8
5.0L / 307 / V8
5.4L / 327 / V8
5.7L / 350 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Chevrolet Chevelle 1969 5.0L / 307 / V8
5.7L / 350 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Chevrolet Chevelle 1970 5.0L / 307 / V8
6.6L / 400 / V8
5.7L / 350 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Chevrolet Chevelle 1971 5.0L / 307 / V8
6.6L / 400 / V8
5.7L / 350 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Chevrolet Chevelle 1972 5.0L / 307 / V8
5.7L / 350 / V8
6.6L / 400 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Chevrolet Chevelle 1973 5.0L / 307 / V8
5.7L / 350 / V8
6.6L / 400 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Chevrolet El Camino 1964 5.3L / 327 / V8
4.6L / 283 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Chevrolet El Camino 1965 5.3L / 327 / V8
4.6L / 283 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Chevrolet El Camino 1966 5.3L / 327 / V8
4.6L / 283 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Chevrolet El Camino 1967 5.3L / 327 / V8
4.6L / 283 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Chevrolet El Camino 1968 5.3L / 327 / V8
5.0L / 307 / V8
5.4L / 327 / V8
5.7L / 350 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Chevrolet El Camino 1969 5.3L / 327 / V8
5.0L / 307 / V8
5.7L / 350 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Chevrolet El Camino 1970 5.0L / 307 / V8
6.6L / 400 / V8
5.7L / 350 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Chevrolet El Camino 1971 5.0L / 307 / V8
5.7L / 350 / V8
6.6L / 400 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Chevrolet El Camino 1972 5.0L / 307 / V8
5.7L / 350 / V8
6.6L / 400 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Chevrolet El Camino 1973 5.0L / 307 / V8
5.7L / 350 / V8
6.6L / 400 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Chevrolet El Camino 1974 6.6L / 400 / V8
5.7L / 350 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Chevrolet El Camino 1975 5.7L / 350 / V8
6.6L / 400 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Chevrolet El Camino 1976 5.0L / 305 / V8
5.7L / 350 / V8
6.6L / 400 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Chevrolet El Camino 1977 5.0L / 305 / V8
5.7L / 350 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Chevrolet El Camino 1978 5.0L / 305 / V8
5.7L / 350 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Chevrolet El Camino 1979 4.4L / 267 / V8
5.0L / 305 / V8
5.7L / 350 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Chevrolet El Camino 1980 4.4L / 267 / V8
5.0L / 305 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Chevrolet El Camino 1981 4.4L / 267 / V8
5.0L / 305 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Chevrolet El Camino 1982 4.4L / 267 / V8
5.0L / 305 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Chevrolet El Camino 1983 5.0L / 305 / V8 142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Chevrolet El Camino 1984 5.0L / 305 / V8 142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Chevrolet El Camino 1985 5.0L / 305 / V8 142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Chevrolet El Camino 1986 5.0L / 305 / V8 142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Chevrolet El Camino 1987 5.0L / 305 / V8 142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Chevrolet Malibu 1964 5.3L / 327 / V8
4.6L / 283 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Chevrolet Malibu 1965 5.3L / 327 / V8
4.6L / 283 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Chevrolet Malibu 1966 5.3L / 327 / V8
4.6L / 283 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Chevrolet Malibu 1967 5.3L / 327 / V8
4.6L / 283 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Chevrolet Malibu 1973 5.0L / 307 / V8
5.7L / 350 / V8
6.6L / 400 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Chevrolet Malibu 1974 6.6L / 400 / V8
5.7L / 350 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Chevrolet Malibu 1975 5.7L / 350 / V8
6.6L / 400 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Chevrolet Malibu 1976 5.0L / 305 / V8
5.7L / 350 / V8
6.6L / 400 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Chevrolet Malibu 1977 5.0L / 305 / V8
5.7L / 350 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Chevrolet Malibu 1978 5.0L / 305 / V8
5.7L / 350 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Chevrolet Malibu 1979 4.4L / 267 / V8
5.0L / 305 / V8
5.7L / 350 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Chevrolet Malibu 1980 4.4L / 267 / V8
5.0L / 305 / V8
5.7L / 350 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Chevrolet Malibu 1981 4.4L / 267 / V8
5.0L / 305 / V8
5.7L / 350 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Chevrolet Malibu 1982 4.4L / 267 / V8
5.0L / 305 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Chevrolet Malibu 1983 5.0L / 305 / V8 142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Oldsmobile Cutlass 1978 5.0L / 305 / V8
5.7L / 350 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Oldsmobile Cutlass 1979 5.0L / 305 / V8
5.7L / 350 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Oldsmobile Cutlass 1980 5.0L / 305 / V8 142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Oldsmobile Cutlass 1981 4.4L / 267 / V8 142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Oldsmobile Cutlass 1985 5.0L / 305 / V8 142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Oldsmobile Cutlass 1986 5.0L / 305 / V8 142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Pontiac Grand Prix 1975 6.6L / 400 / V8 142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Pontiac Grand Prix 1976 6.6L / 400 / V8 142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Pontiac Grand Prix 1978 5.0L / 305 / V8 142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Pontiac Grand Prix 1979 5.0L / 305 / V8 142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Pontiac Grand Prix 1980 5.0L / 305 / V8 142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Pontiac Grand Prix 1981 4.4L / 267 / V8 142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Pontiac Grand Prix 1982 4.4L / 267 / V8 142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Pontiac Grand Prix 1983 5.0L / 305 / V8 142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Pontiac Grand Prix 1984 5.0L / 305 / V8 142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Pontiac Grand Prix 1985 5.0L / 305 / V8 142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Pontiac Grand Prix 1986 5.0L / 305 / V8 142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Pontiac Grand Prix 1987 5.0L / 305 / V8 142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Pontiac LeMans 1975 6.6L / 400 / V8 142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Pontiac LeMans 1976 5.7L / 350 / V8
5.0L / 305 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Pontiac LeMans 1977 5.7L / 350 / V8
5.0L / 305 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Pontiac LeMans 1978 5.0L / 305 / V8
5.7L / 350 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Pontiac LeMans 1979 4.4L / 267 / V8
5.0L / 305 / V8
5.7L / 350 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Pontiac LeMans 1980 4.4L / 267 / V8
5.0L / 305 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin
Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~Fits Most Short/Long Water Pump Applications~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Not Compatible with Serpentine Accessory Drive Systems
Pontiac LeMans 1981 4.4L / 267 / V8
5.0L / 305 / V8
142 Blower; Long Nose; 6-Rib Drive Belt; Incl. Supercharger/Intake Manifold/Belt/Belt Idler/Gaskets/Thermostat Housing/Hardware; Std. Heads; Satin

Specifications:

Blower Size 142
Drive Pulley 6 Rib
Emission Code 5
Engine Chevrolet Small Block Gen I
Engine Make/Size Chevy Small Block V8
Finish Satin
Lower Pulley 6.000 in.
Part Type Supercharger
Supercharger Drive Pulley 6-Rib
Top Pulley 3.050 in.
WARNING CA Proposition 65 WARNING: Cancer and Reproductive Harm

Reviews:

Write a Review
* Your Name:
* Email (This will not be displayed)
* Rating:
Comments:

Ask a question about

Weiand Pro-Street SuperCharger Kit 6500-1:
* Your Name:
* Email (This will not be displayed)
Question:
Chevelle Depot 2021